Installation - Digital Equipment 600a Upgrade Manual

•
Replace the speed button
•
Power on the system and reinstall Windows NT
•
Install new drivers for systems with Accelpro 2000, 2500, or 2500TX graphics cards

Installation

________________________ CAUTION ___________________________
Do not touch any electronic component unless you are safely grounded. Wear
the grounded wrist strap provided, or touch an exposed metal part of the system
unit chassis. A static discharge from your fingers can result in permanent
damage to electronic components.
____________________________________________________________
To convert your DIGITAL Personal Workstation Model 266i to a DIGITAL Personal
Workstation Model 600a, follow these procedures:
1. Backup all applications and data.
2. Shut down your system and all peripheral devices.
3. Unplug the power cord.
________________________WARNING __________________________
Allow at least 15 seconds for the power supply capacitors to discharge
safely.
____________________________________________________________
4. Remove the system lock, if necessary.
DIGITAL Personal Workstation 600a Upgrade Guide 1–3
The 600a Upgrade