Wayne LC2300M Manual page 55

Once all the items listed previously have been checked and corrected as necessary, reinsert the gas
train assembly into the burner.
NOTE: BE CAREFUL NOT TO ACCIDENTALLY REPOSITION EITHER THE FLAME
ROD PROBE OR ELECTRODE DURING REINSTALLATION OF THE GAS TRAIN
ASSEMBLY.
If, after all the above listed items have been carefully checked, the burner still fails to work, check that the spark
electrode is sparking to the burner head. If the unit does not spark, the ignition transformer is bad and must be
replaced.
63899-002 Rev. A 3/20/2024
55