Wayne LC2300M Manual page 45

F.1 BACKUP
F.2 RESTORE
63899-002 Rev. A 3/20/2024
Press "VSD" > 1 second to access
login mode. You will need to log into
the service level. See the Common
Parameters Table in SECTION III for
password.
Toggle "+/-" to Level 000. Press
"Enter"
Toggle "+/-" to Parameter 050.
Parameter 050 should begin flashing.
Press "Enter"
The screen will then display
"bAC_UP". Press "Enter". The
screen will display 0. Press "Enter".
Press "+" to change the 0 to a 1. The
value 1 should be flashing. Press
"Enter". The 1 should no longer be
flashing. After a few seconds, the 1
will return to a 0.
When the screen displays a 0 again,
the backup is complete.
Press "VSD" > 1 second to access
login mode. You will need to log into
the service level. See the Common
Parameters Table in SECTION III for
password.
Toggle "+/-" to Level 000. Press
"Enter"
45