Wayne LC2300M Manual page 54

7. The burner body is not properly grounded to the burner head. Check to ensure the ground
wire is properly connected to the ground tab on the burner head assembly and the ground
tab on the burner body, see Figure 15.
8. The high voltage lead wire from the ignition transformer to the tip of the spark electrode
may have broken, preventing the high voltage current from passing to the electrode tip.
Check all connections thoroughly and/or check continuity of the lead wire assembly with
an ohmmeter.
63899-002 Rev. A 3/20/2024
0.118" (3 mm)
0.157" (4 mm)
0.315" (8 mm)
0.512" (13 mm)
Electrode and Flame Rod Location Settings
Figure 21
ELECTRODE GAP
54