Specifications; Wdg-V Hp Series Analyzer Specifications - Ametek WDG-V HP Series Manual

WDG-V HP Series Analyzer Specifications

For the purpose of this document, specifications listed here apply primarily
to the utilities required for the WDG-V HP Series Combustion Analyzer User
Manual.
PN 10686-17-5, Rev A

Specifications

Output Range
Oxygen:
Combustibles:
Methane:
Accuracy Oxygen:
Combustibles:
Methane:
Response
Oxygen:
Combustibles:
Methane:
Drift
<0.1 % of Cell output per month;
(<0.005 % O
Sample Pressure
±2.49 kPa (±10 inch water gauge)
Maximum Sample 200 °C (392 °F) standard
Dewpoint
Environmental Ambient Temperature: -20 °C to 60 °C (-4 °F to 140 °F) with
Relative Humidity:
Maximum Altitude:
Power Requirements 115 VAC, ±10 %, 47–63 Hz, 1950 VA maximum.
230 VAC, ±10 %, 47–63 Hz, 1950 VA maximum.
From 0–1 % to 0–100 %
From 0–2,000 PPM (standard)
(optional 0–10,000 PPM, 0–1 %, 0–5 %)
From 0–1 % to 0–5 %
±0.75 % of measured value, or
±0.05 % O , whichever is greater
2
±2 % of full scale output range, or
±40 PPM, whichever is greater
±5 % of full scale output range, or
±2,500 PPM, whichever is greater
90 % of a step change <30 seconds
90 % of a step change <45 seconds
90 % of a step change <45 seconds
per month with 2% O applied)
2 2
Hazardous Locations Certification
10 % to 90 %, non-condensing
5000 meters
|
EH&S 13