Figure 146 no mirror-port Command Example
ras(config)# no mirror-port
38.6.2 no trunk
Syntax:
where
<T1|T2|T3|T4|T5>
<T1|T2|T3|T4|T5> lacp
• An example is shown next.
• Disable trunk one (T1).
• Disable LAPC on trunk three (T3).
Figure 147 no trunk Command Example
ras(config)# no trunk T1
ras(config)# no trunk T3 lacp
38.6.3 no port-access-authenticator
Syntax:
where
<port-list>
An example is shown next.
• Disable port access authentication on the switch.
• Disable port access authentication on ports 10 to 15.
• Disable reauthentication on the ports.
Chapter 38 Command Examples
no trunk <T1|T2|T3|T4|T5>
no trunk <T1|T2|T3|T4|T5> lacp
Disables the trunk group.
Disables LACP in the trunk group.
no port-access-authenticator
interface port-channel <port-list> no port-access-authenticator
interface port-channel <port-list> no port-access-authenticator
reauthenticate
= Disables port authentication on the switch.
= Specifies the port(s).
ES-4024A User's Guide
235