Motherboard Features - Supermicro X13SEFR-A User Manual

Table of Contents

Advertisement

Motherboard Features

CPU
Supports a 4th Generation Intel Xeon Scalable Processor with up to 60 cores and a thermal design power (TDP) of up
to 350W
Memory
Up to 4096GB of ECC RDIMM/RDIMM 3DS DDR5 memory with speeds of up to 4800MT/s (DDR5-4400MT/s when fully
populated) in 16 memory slots
DIMM Size
16GB, 32GB, 64GB, 128GB, 256GB
Note: For the latest CPU/memory updates, refer to our website at http://www.supermicro.com/products/motherboard.
Chipset
C741
Expansion Slots
One PCIe 5.0 x16 Right Riser Slot
One PCIe 5.0 x16 AIOM with NC-SI (OCP 3.0 compatible)
Five PCIe 5.0 x8 MCIO connectors
Two M.2 in 2280, 22110 (PCIe 3.0 x2 andSATA)
Baseboard Management Controller
Aspeed AST2600
Network
One Dedicated BMC LAN located on the rear I/O panel
Super I/O
Aspeed AST2600 BMC with RoT Rev 2.0 support
Graphics
Graphics controller via Aspeed AST2600 BMC
I/O Devices
Eight SATA 6Gb/s (RAID 0, 1, 10, 5) via SlimSAS LP x4
Two SATA 3.0 connectors
One VGA
One COM port header
One NCSI header
One TPM header
One VROC key header
Note: The table above is continued on the next page.
Motherboard Features
13
Chapter 1: Introduction

Advertisement

Table of Contents
loading

Table of Contents