Internal Expansion Card; Removing The Ultra Riser Card - Supermicro SuperServer SYS-610U-TNR User Manual

Internal Expansion Card

For most models, the pre-installed Ultra riser card that provides LAN ports also offers another
internal low profile card slot for a Supermicro SAS controller.
Installing the Internal Expansion Card
1. Power down the system as described in section 3.1 and remove the cover.
2. Locate the mounting brackets and standoff in the accessories box. Mount the brackets
to hold the expansion card onto the Ultra riser card.
Figure 3-16. Bracket for Mounting an Internal Expansion Card on the Ultra Riser Card
3. Insert the card into the expansion slot on the Ultra riser card and secure it to the
brackets.

Removing the Ultra Riser Card

To remove the Ultra riser card from the motherboard, remove one screw and lift carefully
with two hands.
Chapter 3: Maintenance and Component Installation
Mounting Bracket
(four-port Ultra card shown in this example)
58