Checking The Clamping Of Screws And Bolts; Checking The Play Of The Linkages; Checking The Weight Stack Cross Alignment - Technogym Total Trunk Service Maintenance Manual

Total Trunk: Service & Maintenance Manual - rev. 1.5
10.3.8. C
HECKING THE CLAMPING OF SCREWS AND BOLTS
1. Check that the screws and bolts are securely clamped, particularly those of the weight stack,
seat adjustments and in general wherever there are moving parts. Lock down any loose
components.
10.3.9. C
HECKING THE PLAY OF THE LINKAGES
1. Check that there is not any play on the machine linkages (lever arms, starting position
adjustment, lever mechanism). Repair and/or replace any worn parts.
10.3.10. C
HECKING THE WEIGHT STACK CROSS ALIGNMENT
With no weight selected, lift up the cross. Check that the selector shaft is correctly centered on the
holes of the plates and that the selector pin can slide easily in to select all the weight stack plates.
Manually center the shaft.
Pagina 10.5