Checking Connection Type; Enabling Dhcp; Disabling Dhcp; Writing The Console Ip Address - Technogym Skillrow Technical Service Manual

The parameter index indicates the number of the WEP key utilised (the permitted values are 1, 2, 3
and 4). If a WEP key is not used, enter 0. Only WEP open key mode is supported.

6.2.3.4 CHECKING CONNECTION TYPE

Command
Command @RWIFICONFIG#
The parameter ssid indicates the name of the Wi-Fi network.

6.2.3.5 ENABLING DHCP

Command
Command @ENABLEDHCP#

6.2.3.6 DISABLING DHCP

Command
Command @DISABLEDHCP#

6.2.3.7 WRITING THE CONSOLE IP ADDRESS

Command
Command @SIPADDRESS ipaddress#
Page 44
Technical Service Guide - Rev. 1.1
Displays SSID, password and type of encryption
used by the configured access point.
Table 25
Enable DHCP.
Table 26
Disable DHCP. Remember to configure, with
the following commands, the static IP address
of the console, the default gateway, the DNS
server and the netmask
Table 27
Sets the static IP address of the console.
Table 28
e-mail: support@technogym.com
SKILLROW:
Notes
Notes
Notes
Notes