Table of Contents
Advertisement
Total Trunk: Service & Maintenance Manual - rev. 1.5
8. ADJUSTMENTS
8.1.
CABLE TENSION
Figure 8.1-1
Figure 8.1-2
1. Fix the flange cable to the cam using the
grub screws a and check that it passes over
the pulleys b and through the two pulleys c.
2. The cable length must be such that, in the
rest position, the pulley support is midway
between the weight stack and the upper
machine frame.
Continued on the following pages →
Pagina 8.1
Advertisement
Table of Contents
