Monthly Maintenance Operations; Check The Mechanisms; Check The Gas Springs; Check The Rubber Stops - Technogym FLEXability Line Service Maintenance Manual

FLEXability LINE: Service & Maintenance Manual - rev. 1.0

9.3. MONTHLY MAINTENANCE OPERATIONS

These operations can be carried out by the machine owner and do not require any
special skills.
The monthly machine maintenance operations consists of simple cleaning, lubrication and
checking the state of wear to ensure the correct and safe functioning of the machine.
For the monthly maintenance of the machine, proceed as follows:
9.3.1. C
HECK THE MECHANISMS
1. Check the wear status of the machine mechanisms: lever arms, shafts, lever systems. Repair
and/or replace any worn parts.
2. Lubricate the mechanisms using MOLYKOTE LONGTERM W 2.
9.3.2. C
HECK THE GAS SPRINGS
1. Check the efficiency of the gas spring, making sure it sufficiently cushions the stem return to its
outward position.
2. Clean the stem using a dry cloth.
CAUTION: do NOT lubricate the gas spring stem for any reason.
9.3.3. C
HECK THE RUBBER STOPS
1. Check the wear status of the stops. Repair and/or replace any worn parts.
2. Check the position of the stops and make sure they are firmly fastened in place.
9.3.4. C
HECKING THE CARRIAGE MECHANISM
1. Check the wear status of the pulleys and carriage guides. Repair and/or replace any worn parts.
2. Clean the carriage support guide bars using alcohol.
9.3.5. C
HECKING THE UPHOLSTERY
1. Check the wear status of the upholstery. Replace any worn parts.
9.3.6. C
HECKING VARIOUS RUBBER PARTS
These operations apply to handles, knobs, frame guards, feet ...
1. Check the wear status of the rubber parts used on the machine. Repair and/or replace any worn
parts.
Page 9.3