Connecting The Alarm In Port To An External Alarm - Paradyne 8820 Installation Manual

Connecting the Alarm In Port to an External Alarm

The following procedure is optional. Follow this procedure if you want to connect a
device that can close a contact upon failure to the BAC's alarm system. This might
be used to provide an alarm in the event of:
See
Procedure
To connect a device to the 8820 BAC's Alarm IN port:
8820-A2-GN20-80
3. Plug the other end of the cable into your modem's serial port using a DB25
adapter and a Null Modem.
Open door or close door detection at remote locations
External fan failures
External power failures in a Remote Terminal (RT)
Alarm In Connector in Appendix A, Pinouts.
1. Plug an 8-pin modular cable into the Alarm IN port.
2. Dress the cable to the right in the cable tray.
3. Connect the other end of the cable to the device providing an alarm output.
November 2004
5. Cabling: Test Access SIM
5-5