Connecting To A Modem For Remote Management (With Mcp) - Paradyne 8820 Installation Manual

Connecting to a Modem for Remote Management (with MCP)

Before connecting the 8820 BAC to a standard AT dial-up modem, configure the
modem with the following settings:
Procedure
To connect the 8820 BAC to a dial-up modem:
8820-A2-GN20-80
Set the modem for auto answer. For example, ATS0=1.
Turn off character echo. For example, ATE0.
Enable result codes in originate mode only. For example, ATQ2.
Set the modem to ignore Data Terminal Ready (DTR). For example, AT&D0.
1. Plug a serial cable into the MCP Serial port of the chassis.
2. Dress the cable to the right and through the cable retainer.
3. Plug the other end of the cable into your modem's serial port using a DB25
adapter and a Null Modem.
November 2004
5. Cabling: Test Access SIM
5-3