Filler Plates For The Bac - Paradyne 8820 Installation Manual

Filler Plates for the BAC

Procedure
To remove the multislot filler plate:
8820-A2-GN20-80
If You Are
Populating . . . Then . . .
Slots 1–7 1. Remove the multislot filler plate from the chassis.
and 10–16
2. Break away as many panels as needed.
3. Reinstall the filler plate to cover remaining empty slots.
4. Make sure the attached receptacle covers the broken edge.
5. Make sure the EMI gasket is on the side of the filler panel that is
opposite the receptacle.
Slots A–B, Remove the single EMI-gasketed filler plate. Store for future use.
9 and 18
Slots 8 and 17 Remove the single filler plate with receptacle and install
EMI-gasketed filler plate.
1. Remove the screws fastening the filler plate to the chassis.
2. Lift the filler plate away from the chassis.
November 2004
2. Installation
2-21