Front Panel Emulation - Paradyne 3172 Operator's Manual

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Front Panel Emulation Software
Starting Front Panel Emulation
Overview
The E1 DSU/CSU offers functionality through Front
Panel Emulation software that is similar to that provided
by the E1 DSU/CSU front panel. The E1 DSU/CSU can
either be locally or remotely attached to a 386 or higher
PC that has at least 4 MB of RAM. (An external modem is
required for remote attachment.) A copy of the E1
DSU/CSU front panel appears on the PC. The
functionality of the front panel is available by clicking on
the Function keys with the mouse rather than by pressing
keys from the actual front panel.
Installing Front Panel
Emulation Software
The Front Panel Emulation software is supplied on a
3.5-inch, 1.44 MB, double-sided, high-density,
write-protected diskette, with 15 sectors per track,
80 tracks per side, and 96 tracks per inch.
This software must be installed on a 386 or higher PC
with Microsoft Windows Release 3.1 or higher,
MS-DOS 3.3 or higher, and at least 4 MB of RAM. A
VGA color monitor with VGA adapter (or higher
resolution) is required. A mouse is also required. The
following procedures must be performed in the Windows
environment.
To install Front Panel Emulation software,
1. Insert the diskette into the appropriate drive.
2. Select File from Program Manager.
3. Choose Run.
3170-A2-GB20-10

Front Panel Emulation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
March 1996
4. Type the letter of the drive being used by the
diskette, followed by a colon. Then,
5. TYPE: INSTALL
6. PRESS: ENTER
7. An Information screen appears. Choose Continue
to continue the installation.
8. Type the letter of the destination drive, followed
by a colon (default is C:), then the appropriate
directory name (default is C:\FRONTPAN).
If the selected directory already exists, the
following message appears: The specified
directory already exists. Do you want to
overwrite the directory?
If the selected directory is new, the following
message appears: The specified directory does
not exist. Do you want to create the directory?
9. Select Yes. A confirmation screen appears. Select
Install to continue the installation.
10. A Setup Completed screen appears. Select
Continue. The Program Manager screen appears
with the Front Panel icon.
G
G-1
G-1
G-2
G-1