Paradyne 3172 Operator's Manual page 169

S
secondary clock
configuration option, C-12
functional description, 3-33
self-test
displaying results, 4-2
front panel indications, 2-9, 3-5
troubleshooting, 4-11
Send Ones configuration option, C-2, C-4
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-16
used with SNMP system, 1-2, 2-3, 3-14, F-1
SES (Severly Errored Seconds) report, 4-7
shield, RX, 1-5
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-14–3-19
menu tree branches, A-1
option table, C-17–C-22
option worksheet, C-28
connection examples, 2-3–2-4, 2-8, F-1–F-2
database, 1-2
IP addressing, F-1–F-2
manager, 1-2
MIBs
functional description, 1-2
list of objects, E-1–E-18
procedure for configuring access, 3-17–3-18
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-12
traps
functional description, 1-2, 4-10
procedure for configuring, 3-18–3-19
specifications, environmental, B-1, B-2
Stat (Status) branch
examples of use, 3-8, 3-10, 4-2, 4-3, 4-5, 4-24
in the menu tree, A-1
status messages. See messages, status
STest (Self-Test Health) branch
example of use, 4-2
in the menu tree, A-1
StEvnt (Status Event) report, 4-8
straps. See configuration options
subnet, 3-14, C-18, C-19, C-20, F-1
switch, rear panel, 1-4, 1-5
synchronous data port. See PORT (1–4) interface
T
technical specifications, B-1
temperature
operating, B-2
storage, B-2
Test branch
example of use, 4-14–4-26
in the menu tree, A-1
test commands, 4-14–4-26
front panel LED indications, 3-5
3170-A2-GB20-10
lamp test, 4-23–4-24
local loopback, 4-15–4-20
abort, 4-19–4-20
data channel loopback (DCLB), 4-18
data terminal loopback (DTLB), 4-19
DTE loopback (DLB), 4-17
line loopback (LLB), 4-16
payload loopback (PLB), 4-16
repeater loopback (RLB), 4-17–4-18
remote loopback, 4-14
test messages, 4-24–4-26
test patterns, 4-20–4-23
test jacks
functional description, 4-13
physical description, 1-3, 3-2, 3-4
time-slot 16 (TS16)
channel allocation, 3-20, 3-21, 3-22
configuration option, C-8
timing. See clocking
traps, SNMP. See SNMP, traps
troubleshooting
device health, 4-3–4-4
diagnostic table, 4-11–4-12
performance, 4-5–4-8
power-up self-test, 2-9, 4-2
TStat (Test Status) branch
example of use, 4-24–4-26
in the menu tree, A-1
TX network connector, 1-5
U
UAS (Unavailable Seconds) report, 4-7
User Configuration branch
example of use, 3-14–3-15
in the menu tree, A-1
option table, C-13–C-15
option worksheet, C-23
user interface, acquiring/releasing, 3-35–3-36
V
V.35 interface, D-11
V.54 Loop 2. See data channel loopback (DCLB)
V.54 Loop 3. See data terminal loopback (DTLB)
W
warmStart trap, 4-10
weight, B-2
wireless communications, 2-1, 2-2
worksheets, configuration option, C-23–C-28
X
X.21 interface, D-13
March 1996 Index-5