Paradyne 3172 Operator's Manual page 166

ACCULINK 317x E1 DSU/CSU
DTE Interface, C-2
General, C-12
Network Interface, C-7
Port, C-3–C-6
SNMP, C-17–C-22
User Interface, C-13–C-15
worksheets, C-23–C-28
connectors, rear panel
cabling examples, 2-8
functional description, 1-5
physical description, 1-4
pin assignments, D-1–D-15
CPU failure message, 4-2
Ctrl (Control) branch
examples of use, 3-9, 3-11, 3-36
in the menu tree, A-1
Cust1 (Customer 1) configuration area
functional description, 3-11
in the menu tree, A-1
Cust2 (Customer 2) configuration area
functional description, 3-11
in the menu tree, A-1
cyclic redundancy check (CRC)
configuration option, C-2, C-7
error indication, 4-7
D
DACS (Digital Access and Cross-connect System), 2-1,
2-2
daisy chaining
configuration options, C-13, C-15
connectivity, 1-5, 2-3, 2-4
data channel loopback (DCLB), 4-18, C-3
data port. See PORT (1–4) interface
data terminal loopback (DTLB), 4-19, C-3
database, SNMP, 1-2
DC power option, D-14
dc power option, 2-5–2-7, B-1, D-14
default configuration options, C-1
DevFail (Device Failure) message, 4-4
DevHS (Device Health and Status) branch
example of use, 4-3–4-4
in the menu tree, A-1
dimensions, B-2
DL (Download) branch
in the menu tree, A-1
operation, 3-36
DS0 channel allocation. See channel allocation
DTE Configuration branch
in the menu tree, A-1
option table, C-2
option worksheet, C-23
DTE Drop/Insert interface
channel allocation procedure, 3-20–3-26
configuration options, C-2
failure message, 4-2
Index-2
front panel LED indications, 3-6
functional description, 1-2, 1-5, 2-1
managed by SNMP, 1-2
physical description, 1-4
pin assignments, D-3
technical specifications, B-1
troubleshooting, 4-11
DTE loopback (DLB), 4-17
configuration option, C-2
external control interface, D-3
E
EER (Excessive Error Rate) condition
ASCII terminal/printer message, 4-9
Device Health and Status message, 4-4
front panel LED indication, 3-5, 3-6
Performance Report message, 4-8
troubleshooting, 4-12
EIA 530A interface, D-7
Embedded Data Link (EDL)
configuration option, C-5, C-6
used with SNMP system, 1-2, 2-3, 2-4, F-1
enterprise-specific trap, 4-10
environmental specifications, B-2
equipment list, H-1
error messages. See messages, alarm
ES (Errored Seconds) report, 4-7
F
Facility Data Link (FDL)
configuration option, C-7
used with SNMP system, 1-2, 2-3, 2-4, F-1
Fact (Factory) configuration area
functional description, 3-11
in the menu tree, A-1
failure analysis. See troubleshooting
failure message
during power-up self-test, 2-9, 4-4
troubleshooting, 4-12
feature numbers, H-1
features, 1-1–1-2
fractional E1, 2-1, 2-2
framing configuration option, C-2, C-7
front panel
acquiring/releasing the user interface, 3-35–3-36
operation, 3-2–3-7
physical description, 1-3, 3-2
Front Panel Emulation
cabling example, 2-8
feature number, H-1
functional description, 1-2, 3-2, G-1
installation and operation, G-1–G-2
March 1996 3170-A2-GB20-10