Basic Settings; Set Indoor Station Network Parameters - HIKVISION DS-KH9510-WTE1(B) Configuration Manual

Video Intercom 9 Series Indoor Station Configuration Guide
Note
When you forget the gesture password, you can tap Forgot Gesture Password
●
or Use admin password to enter admin password to unlock.
When you tap Settings → Advanced Settings to disable Unlock by Gesture, you
●
can skip the step.

2.4 Basic Settings

Basic settings is required before starting using the indoor station. It is necessary to
set the indoor station network, room No., linked devices, device time display, and so
on.

2.4.1 Set Indoor Station Network Parameters

Network connection is mandatory for the use of the indoor station. Set the network
parameters after activating the indoor station. Only when the IP address of the
indoor station is in the same network segment as other devices, it can work properly
in the same system.
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Steps
Note
The default IP address of the indoor station is 192.0.0.64.
Two ways are available for you to set IP address: DHCP, and set IP address manually.
1. On the main page of the device, tap Settings → Advanced Settings → Network
Settings to enter the network settings page.
Note
Admin password is required to enter the advanced settings page.
8