Table of Contents
Advertisement
User Manual
SAFETY GUIDELINES AND WARRANTY
SAFETY INSTRUCTIONS
Read this manual to help you understand the intent and operation of this tool prior to installing BAND-IT Tie-Lok
® ties.
o
o
o
o
o
o
IMPORTANT:
o
o
The IT8000 tool is designed for use with BAND-IT 3/8" Tie-Lok® ties only. The IT7000 tool is designed for use
with BAND-IT 1/4" Tie-Lok® ties only. Accordingly, BAND–IT– IDEX, Inc. makes no representations with respect
to the compatibility of these tools when used with non-BAND-IT or any other incompatible clamps.
WARRANTY
For warranty information go online at:
https://www.band-it-idex.com/en/terms-conditions
Save these instructions for future use.
This equipment has been tested by BAND-IT-IDEX and meets the requirement of stability during use, storage
conditions, transportation, assembly, dismantling when out of service, testing or foreseeable breakdowns
providing that the proper safety precautions are observed.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
This product manual contains detailed instructions for setting up the tool and safely
installing ties.
Always wear safety glasses, appropriate gloves and safety shoes when operating this tool.
Keep hands away from tool head and clamp while operating.
Care should be taken to ensure fingers are not in the way of the clamp being applied.
Maintain the tool by following the scheduled preventative maintenance interval provided in
this document.
Never use this product for anything other than its original intended purpose.
The object clamped and the 3/8" Tie-Lok® tie or 1/4"Tie-Lok® tie must be compatible with each
other and the environment in which the final product will be used.
Always disconnect from air and electrical power sources before performing maintenance.
4
IT8000 3/8" TIE-LOK DATA TOOL
IT7000 1/4" TIE-LOK DATA TOOL
ITC800 CONTROL SYSTEM
Document # P80080 Rev. C.3
© Copyright
BAND-IT-IDEX, Inc. 2024
All rights reserved
Advertisement
Table of Contents
