Advertisement
Operating
Manual
This equipment has been tested by BAND-IT-IDEX and meets the requirement of stability
during use, storage conditions, transportation, assembly, dismantling when out of service,
testing or foreseeable breakdowns providing that the proper safety precautions are
observed.
DANGER—Misuse of this equipment may result in serious injury to personnel.
• Only use the equipment for its intended purpose, as described in this manual
• Do not attempt to operate the equipment with covers removed
• Refer to the installation section before installing machine
• Do not operate machine with wet hands
Please read this entire manual before unpacking, setting up or operating this equipment.
Pay attention to all danger and caution statements. Failure to do so could result in serious
injury to the operator or other personnel, or damage to the equipment.
CAUTION
Caution – Equipment generates up to 87 db of audible noise when in use.
Hearing protection is advised for use of 8hr/day
Caution – Equipment generates up to 18.2 m/s
Caution – Risk of pinch point
Located at tool head during cutoff cycle
Caution – Risk of electric shock
With cutoff signal tools only
Caution – Refer to accompanying documents
It is the task of the employer to warn his or her staff of risks, to train them on prevention of
accidents, and to provide necessary safety equipment and devices for the operator's safety.
Before starting to work with the machine, the operator should check the features of the
machine and learn all details of the machine's operation. The machine should only be
operated by staff members who have read and understand the contents of this manual.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Safety Guidelines
2
of vibration when in use.
www.BAND-IT-IDEX.com
Page 3 of 36
IT1000-C / IT2000-C
1/4" IT Tool
Document # P49050 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Advertisement
