Table of Contents
Advertisement
User Manual
TOOL SETUP
OPERATING REQUIREMENTS
Table 2
Clamp Type
Operation Air Requirements
Power requirements
Power Cord
Human-Machine Interface (HMI)
Emergency Stop
Power Output
Airborne Noise Emissions
Vibration Data – Handheld Unit
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
BAND-IT 3/8" Tie-Lok® Tie Series
BAND-IT 1/4" Tie-Lok® Tie Series
80 PSI (552 kPa) Clean dry compressed air
Air Flow Rate: 0.25 CFM (7.1 L/min.)
Do not exceed 100psi (690kPa) into panel.
Input supply not to exceed max listed on
regulator assembly.
110Volts/60Hz or 240Volts/50Hz Grounded AC
8 A Max
5kA SCCR
North America: 120V, 15A, 14AWG
Cord Receptacle: IEC 60320 C13
Programmable Color Touchscreen
Application of emergency stop button will stop
electric motor and open all valves, removing air
pressure from pneumatic cylinders.
Motor: 240V, 3.1A MAX, 8kHz
HMI: 24V, 350mA
Data Cable: 24V, 2A
A-Weighted Pressure level: 70 dBA
Peak C-Weighted Pressure Level: 71 dBA
2
Continuous: 3.2 m/s
2
Peak: 30.2 m/s
@ cutoff
10
IT8000 3/8" TIE-LOK DATA TOOL
IT7000 1/4" TIE-LOK DATA TOOL
ITC800 CONTROL SYSTEM
Document # P80080 Rev. C.3
© Copyright
BAND-IT-IDEX, Inc. 2024
All rights reserved
Advertisement
Table of Contents
