Clean Breather - Komatsu GALEO HM350-2 Operation & Maintenance Manual

SERVICE PROCEDURE SERVICE PROCEDURE
Suction strainer for rear differential lock
This is on the left side of the rear differential case.

CLEAN BREATHER

Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil
temperature to go down before performing this operation.
Remove the mud and dirt from around the breather, then remove the breather and wash out the dirt from inside with
clean diesel oil or flushing oil.
Transmission
Hydraulic tank
CHECK ACCUMULATOR GAS PRESSURE
Please contact your Komatsu distributor to have the gas pressure checked when making periodically replacement
of safety parts or carrying out the legally required 2000 hour or every year service.
CHECK, ADJUST ENGINE VALVE CLEARANCE
Special tools are needed for inspection and maintenance, so contact your Komatsu distributor.
4 - 82
WARNING
MAINTENANCE MAINTENANCE