Komatsu GALEO HM350-2 Operation & Maintenance Manual page 111

EXPLANATION OF COMPONENTS
METHOD OF OPERATION
METHOD OF SETTING PRESET BUTTONS
To listen to a preset station, use band selector button (1) to select
AM, FM1, or FM2, then press the preset switch number to listen to
the desired station.
It is possible to preset six AM stations and 12 FM stations (FM1: 6,
FM2: 6).
1. If you are playing a cassette, press the tape eject button to stop
the tape.
2. Select the station to be preset.
Use band selector button (1) to select MW (AM), FM1, or FM2,
then use the manual tuning button to select the frequency of
the broadcasting station.
3. Press manual memory button (2) or seek tuning button (3).
4. Press preset button (4) of the number to be preset for 2
seconds while the frequency display is being shown on the
display. (The preset channel and frequency are displayed and
the presetting is completed).
5. Repeat Steps 2 to 4 to preset other stations.
REMARK
Use Steps 2 to 4 also when changing the setting of a preset switch to another station.
When the power is disconnected, such as when the battery is replaced, all the settings are deleted, so preset the
stations again.
MANUAL MEMORY BUTTON
Select the station to be preset with manual tuning button (1) or
seek tuning button (2), then keep button No.1 to button No.6 of
button (3) pressed for 2 seconds while the frequency is being
displayed to preset the station.
3 - 62
OPERATION