Body Pivot Pin; Articulate Lock - Komatsu GALEO HM350-2 Operation & Maintenance Manual

EXPLANATION OF COMPONENTS

BODY PIVOT PIN

When carrying out inspection of the machine with the dump body raised, always set the dump lever to the HOLD position, lock
with the dump lever lock knob, then use the body pivot pin.
This is a safety device for the dump body, and is used when
carrying out inspection or maintenance with the dump body raised.
Raise the dump body fully, insert body pivot pins (1). Always insert
the body pivot pins on both sides.
STOWING BODY PIVOT PIN
Store the body pivot pin under the rear of the dump body.
Insert body pivot pin (1), then insert lock pin (2) to stow the body
pivot pin.

ARTICULATE LOCK

If the machine is transported or raised without applying the articulation lock, the machine may suddenly articulate. This may
cause serious injury to persons in the surrounding area.
When transporting or raising the machine, always apply the articulation lock.
Apply the articulation lock if necessary when carrying out maintenance.
The articulation lock is a device to lock the front frame and rear
frame to prevent the machine from articulating.
LOCK position: Always set to this position when transporting or
raising the machine.
Set to the LOCK position if necessary when
carrying out maintenance.
FREE position: Always set to this position when traveling
3 - 46
WARNING
WARNING
OPERATION