Table of Contents
Advertisement
OPERATION
DEHUMIDIFYING, DEFROSTING
1. Press ON/OFF switch (1) to turn on the air conditioner power.
2. Press fan switch (2) to set to the desired air flow.
3. Press temperature control switch (3) to set to the desired
temperature.
4. Press RECIRC/FRESH selector switch (4) to set to FRESH.
5. Press mode selector switch (5) or DEF switch (6) to set the
vents to the desired position.
6. Press air conditioner switch (7) to operate the cooling.
REMARK
If the ambient temperature is below 0°C (32°F), the air conditioner cooling may not work. In this case, set to
RECIRC and warm up the inside of the cab, then turn the air conditioner switch ON to operate the cooling.
When defrosting, if the temperature control switch is pressed to set the temperature bar to the maximum (all 8
segments on the bar light up), this will improve the efficiency of removing the frost and preventing mist.
EXPLANATION OF COMPONENTS
3 - 69
Advertisement
Chapters
Table of Contents
