Komatsu GALEO HM350-2 Operation & Maintenance Manual page 110

OPERATION
EXPLANATION OF COMPONENTS
METAL TAPE BUTTON
(used also for preset button No. 5)
This button (11) is used when playing a metal or chrome tape. This
button is also used for preset button No. 5. When it is pressed,
"MTL" appears on the display.
MANUAL TUNING BUTTONS
These buttons (12) are used for manual tuning.
∧
When "TUN " button is pressed, the frequency goes up 9 kHz for
∨
AM or 0.1 MHz for FM; when "TUN " button is pressed, the
frequency goes down 9 kHz for AM or 0.1 MHz for FM.
If the button is pressed down and held, the frequency will change
continuously.
SEEK TUNING BUTTONS
These buttons (13) are used to seek tuning.
When the "SEEK UP" button is pressed, the search automatically
goes up; when the "SEEK DOWN" button is pressed, the search
automatically goes down.
When the next station that can be received is found, it
automatically stops.
BAND SELECTOR BUTTON
When this button (14) is pressed, the band is switched between
FM1, FM2, and MW (AM). The band is shown on the display.
3 - 61