Checking For Looseness Of High-Pressure Clamp, Hardening Of Rubber; Checking For Missing Fuel Spray Prevention Cap, Hardening Of Rubber - Komatsu GALEO HM350-2 Operation & Maintenance Manual

MAINTENANCE
SERVICE PROCEDURE

CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER

Check clamps (1) to (18) for loose bolts and hardening of the rubber parts. If there are any loose bolts or hardened
rubber, please contact your Komatsu distributor for replacement.

CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER

Check that no spray prevention caps (1) to (11) are missing and that there is no hardening of any rubber parts. If any
missing caps or hardening of rubber are found, please ask your Komatsu distributor to install or replace.
4 - 84