Table of Contents
Advertisement
OPERATION
LIFTING PROCEDURE
Lifting work can be carried out only with machines displaying a lifting mark.
When carrying out the lifting operation, stop the machine on firm level ground, and do as follows.
1. Start the engine, set the machine facing directly to the front,
place the dump lever at the FLOAT position, and check that the
dump body pilot lamp goes out.
2. Stop the engine, apply the brake, check that the area around
the operator's compartment is safe, then lock with the
articulation lock to prevent the front frame and rear frame from
articulating.
3. To prevent damage to front grill (1) during lifting operations,
remove front grill (1) before starting.
TRANSPORTATION
3 - 119
Advertisement
Chapters
Table of Contents
