Komatsu GALEO HM350-2 Operation & Maintenance Manual page 208

MAINTENANCE
EVERY 4000 HOURS SERVICE
Change oil in hydraulic tank
Lubricate fan pulley
Check alternator, starting motor
Check water pump
Check air compressor
Check fan pulley and tension pulley
Checking for looseness of high-pressure clamp, hardening of rubber
Checking for missing fuel spray prevention cap, hardening of rubber
EVERY 6000 HOURS SERVICE
Lubricate drive shaft (*)
*: If special drive shaft grease is used, carry out greasing every 6000 hours or every two years. When the normal
lithium-based grease is used, it is necessary to carry out greasing every 250 hours.
EVERY 8000 HOURS SERVICE
Replace high-pressure piping clamp
Replace fuel spray prevention cap
Overhaul starting motor and alternator
MAINTENANCE SCHEDULE CHART
4- 83
4- 83
4- 83
4- 83
4- 83
4- 83
4- 84
4- 84
4- 85
4- 86
4- 86
4- 86
4 - 19