Fuses - Komatsu GALEO HM350-2 Operation & Maintenance Manual

EXPLANATION OF COMPONENTS

FUSES

The fuses protect the electrical equipment and wiring from burning
out.
If the fuse becomes corroded, or white powder can be seen, or the
fuse is loose in the fuse holder, replace the fuse.
NOTICE
When replacing any fuse, always turn the power off (turn the starting
switch to OFF).
When replacing the fuse, always use a fuse of the same capacity and
type.
FUSE CAPACITY AND CIRCUIT NAME
Fuse BOX I (BT1)
No. Capacity
(1) 20A Main lamp
(2) 10A Turn signal lamp
(3) 20A Head lamp (right)
(4) 20A Head lamp (left)
(5) 10A Side lamp (right)
(6) 10A Side lamp (left)
(7) 10A Stop lamp
(8) 20A Backup lamp, backup buzzer
(9) 20A Working lamp (front)
(10) 20A
3 - 48
Name of circuit
–
OPERATION