Table of Contents
Advertisement
59
REPAIRING SYSTEM - MAINTENANCE
This feature allows you to restore the operating system to the latest version or version from a file without deleting any user data. Only the
system will be refreshed.
Depending on how you have entered the Recovery Mode, different system will be available for repairing:
inactive when entered via configuration interface or active when entered using
1. Enter the Recovery Mode.
2.
Click Repair System A/B.
3.
Choose if you want to restore Latest version or use Local file.
4.
Confirm.
59.1 - Resetting network settings
In some cases, problems with the gateway may be caused by changes in the network configuration of the environment in which the gate-
way is located.
If you do not want to restore the entire system to factory settings, try resetting the network settings first, as this may solve your problems
with the gateway.
1. Enter the Recovery Mode.
2.
Click Reset in the Reset Network Settings section.
3. Confirm.
59.2 - Resetting network settings
In some cases, problems with the gateway may be caused by changes in the network configuration of the environment in which the gate-
way is located.
If you do not want to restore the entire system to factory settings, try resetting the network settings first, as this may solve your problems
with the gateway.
1. Enter the Recovery Mode.
2.
Click Reset in the Reset Network Settings section.
3. Confirm.
59.3 - Recovering system
•
CAUTION! – The configuration will be removed and lost if not backed up.
This feature allows you to restore the operating system to the latest version or version from a file and delete all data from this system (users,
devices, scenes etc.).
Depending on how you have entered the Recovery Mode, different system will be available for recovering:
inactive when entered via configuration interface or active when entered using
1. Enter the Recovery Mode.
2.
Click Recover System A/B.
3. Choose if you want to restore Latest version or use Local file.
4. Confirm.
59.4 - Restoring factory defaults
•
CAUTION! – The configuration will be removed and lost if not backed up.
This feature allows you to restore the gateway to factory settings.
It means factory software version will be restored and all data from system A and B will be deleted (users, devices, scenes etc.).
1. Enter the Recovery Mode.
2.
Click Factory Reset button under Network Status section.
3. Check "Yes, I'm sure and I know what I'm doing" checkbox.
4. Confirm action.
button. Switch system to repair the other one.
button. Switch system to recover the other one.
44
Advertisement
Table of Contents
