Table of Contents
Advertisement
56
ALARMS
Alarm feature allows to create alarm zones using sensors in your system.
Breaching any sensor in an armed zone will trigger an alarm.
The system will inform you about an alarm, you can also activates scenes when alarm triggers.
icon indicates the occurrence of an alarm.
When alarm occurs, icon becomes red and clickable.
Clicking
icon will direct you to Settings > Alarm so that you can see in which zone the alarm occurred.
56.1 - Adding zones
1. Open the Configuration interface.
2. Go to
> Climate.
3. Click
Add
Zone.
4. Name the new zone.
5. Select rooms or devices to be included in the new zone.
56.2 - Arming/disarming zones
Arming zone will arm all devices in this zone, and disarming the zone will disarm all devices in this zone.
1. Open the Configuration interface.
2.
Go to
> Alarm.
3. Under
Arming
column click the toggle to arm/disarm the zone.
4. Enter PIN if required (default PIN is 1111).
56.3 - Setting PIN
The default PIN is 1111, we strongly recommed changing it.
1. Open the Configuration Interface.
2.
In top right corner click your user name.
3. Choose
Account Settings
4. In
Alarm Settings
section:
• Set 4-digit PIN.
• Choose if you want the gateway to ask for PIN also while arming (not only disarming).
5. Save.
56.4 - Setting delay for arming/disarming
1. Open the Configuration interface.
2. Go to
> Alarm.
3. Enter delay time (in seconds) for the zone:
• Entry delay – the alarm will delay triggering to allow you to disarm the zone when you enter it.
• Exit delay – the alarm will delay arming to allow you to leave the zone without triggering it.
56.5 - Editing zone name and devices
1. Open the Configuration Interface.
2. Go to
> Alarm.
3. Click the
to edit the zone.
4. Change name or devices in the zone.
5. Save.
from the menu.
41
Advertisement
Table of Contents
