Table of Contents
Advertisement
51
CREATING THERMOSTATS - AUTOMATION
1. Open the Configuration Interface.
2. Go to
> Events.
3. Click on
4. Click Add user button.
5. Click Thermostat.
6. Enter the name of the thermostat.
7. Choose a Room.
8.
Choose the main device.
9. Select heating and/or cooling devices.
10. Save.
52
ZONES - AUTOMATION
52.1 - Adding zones
1. Open the Configuration interface.
2. Go to
> Climate.
3. Click
Add
scene.
4. Select how zones should be created:
• Automatically – zones will be created automatically for all rooms with temperature devices.
• Manually – manually select devices to be included in the new zone.
52.2 - Zone modes
• Schedule – zone works according to the set schedule.
• Manual – constant temperature is set for a specified time duration.
• Vacation – constant temperature is set until disabled.
52.3 - Adding zones
1.
Open the Configuration interface.
2. Go to
> Climate.
3. Click > to expand the zone.
4. Select operating mode:
• Heating: devices increase the temperature to reach the temperature setpoint,
• Coolin: devices decrease the temperature to reach the temperature setpoint,
• Auto: devices determine if they should cool or heat to reach the temperature setpoint,
• Off: devices are always off.
5. Set start times for periods by moving the sliders or entering them below.
6.
Enter temperatures to be set on each period.
7. Save.
Note.
If you want to use the same schedule on multiple days, you can set it once, then copy it to the remaining days.
52.4 - Editing zone name and devices
1. Open the Configuration Interface.
2. Go to
> Climate.
3. Click the
to edit the scene.
4. Change name or devices in the zone.
5. Save.
38
Advertisement
Table of Contents
