Switches (A Group Of Switches); The Linked Device May Act As A Device Of A Few Types; Creating Switches (Grouping); Blinds (A Group Of Blinds) - Nice Yubii Home Pro YHP-001 Instructions And Warnings For Installation And Use

21

SWITCHES (A GROUP OF SWITCHES)

Advanced and complex smart homes often consist of many switches placed within close areas which we want to control at once.
Instead of making a scene which will coordinate the operation of all switches, we can group switches into one Linked Device, so all selected
device will follow the actions of the "Master Device".

21.1 - The Linked Device may act as a device of a few types:

• RGBW Controller – linked devices follow parameters such as brightness, color, and power state.
• Binary switch – linked devices follow the power state of the master device (appropriate for simple switches, smart plugs).
• Color controller – linked devices follow color parameters of the master device.
• Multilevel switch – linked devices follow the voltage output of the master device (appropriate for Dimmers).

21.2 - Creating Switches (grouping)

1. Open the Configuration interface.
2. Go to > Devices.
3. Click on
4. Select Nice Device.
5. Select Thermostat.
6. Enter the name of the thermostat.
7. Choose a Room.
8. Choose the main device.
9. Select heating and/or cooling devices.
10. Save.
22

BLINDS (A GROUP OF BLINDS)

If we have more blinds or awnings in the same area we usually control at once, it is a good idea to grup them in one device. All blinds in that
group will follow the master device of our choice.
Usually, devices such as Roller Shutters support few devices of such type, so we need to select appropriate role for the main device:
• Blind without positioning,
• Blind with positioning,
• Venetian blind,
• Garage door without positioning,
• Garage door with positioning.

22.1 - Creating Blinds (grouping)

1. Open the Configuration interface.
2. Go to > Devices.
3. Click on
4. Select Nice Device.
5. Select Blinds.
6. Enter the name of the thermostat.
7. Choose a Room.
8. Choose Devices (all that you want to group).
9. Choose Master Device (the one that other devices will follow).
10. Set the Device Role according to your devices:
• Blind without positioning,
• Blind with positioning,
• Venetian blind,
• Garage door without positioning,
• Garage door with positioning.
11. Save.
20