40
TIME AND UNITS
The gateway gives you possibility to set the time, time zone, units and even separators!
40.1 - To adjust the settings:
1. Open the Configuration Interface.
2. Go to
> Access > Users.
3. Open the Time & Units tab.
Now you can change settings, such as:
40.2 - Date and time:
• Time zone,
• Date and time (you can get it from the NTP server or set manually),
• NTP server,
• Date format,
• Hour format (12-hour, 24-hour),
• Date,
• Time.
40.3 - Units and separators:
• Temperature unit (Celsius, Fahrenheit),
• Wind speed unit (km/h, mph),
• Decimal mark (comma, dot).
41
LOCATION
Setting location in the gateway allows you to personalize your smart home experience.
Location is used for weather retrieving and can also be useful for automation purposes.
Once you set your home and/or work location, you can trigger certain scenes via entering or leaving the zone.
41.1 - Enabling Support Access
To enable support access:
1.
Go to
> General > Location (tab).
2. Drag the map so that you see your home address.
3. Click the location of your home to update the pin.
4. Set the radius accordingly to your house and property size, e.g. 100m.
5. Save.
41.2 - To add another location:
To enable support access:
1.
Go to
> General > Location (tab).
2. Click Add Location.
3. Enter the name of your new location, e.g. Work.
4. Drag the map and click the place of your work. property size, e.g. 100m.
5. Set the radius of your work, e.g. 300 m.
6. Save.
32