Table of Contents
Advertisement
17
LINKED DEVICES
Linked Devices combine several devices into one device.
Using this function results in controlling the group of related devices as if they were one single device.
The group will be presented in the interfaces as a single device.
The gateway offers different Linked Devices types: Thermostats, Humidifiers, Video Gates, Switches, Blinds and Sprinklers.
18
THERMOSTATS
Heating systems present at our homes are quite complex and they often do not offer any smart home capabilities natively.
That's why you can create a Linked Device, which can act as the given Thermostat.
18.1 - How does the linked device work?
When you choose the main device for the thermostat it means that the actions of the switches selected in the Linked Device will depend on
the readings from the main device.
Depending on the selected devices, different operating modes will be available. If you select a device (Switch/Wall Plug) as a heating device
only, the linked device will support modes only for heating. If you select devices for cooling as well, then the Linked Device supports more
modes, i.e.: Heat, Cool, Auto, Off.
18.2 - Creating Thermostats
You can add a Nice thermostat to the system and you will be able to start scenes by clicking any remote key.
1. Open the Configuration interface.
2. Go to
> Devices.
3. Click on
4. Select Nice Device.
5. Select Thermostat.
6. Enter the name of the thermostat.
7. Choose a Room.
8. Choose the main device.
9. Select heating and/or cooling devices.
10. Save.
18.3 - How to set schedules for this thermostat?
Heating schedule for this Linked Device is accessible in Climate panel.
You can read more about it in the
Climate Schedules
section.
18
Advertisement
Table of Contents
