Table of Contents
Advertisement
14
Z-WAVE DEVICES ASSOCIATIONS
Associations allow devices to control other devices directly within the Z-Wave network without the participation of the main gateway.
Devices such as Dimmer-Control, On/Off-Control, Roll-Control, RGBW-Control can continue to work and operate selected devices even when
the main gateway is damaged or turned off (in case of a fire, flood, or system malfunction). You can read more about associations here.
14.1 - Setting associations
1. Open the Configuration interface.
2. Go to
> Devices .
3. Click the device you want to associate.
4. Open Associations tab.
5. Select the source EndPoint and Group of the association appropriate for your needs.
6. Select the device you want to associate with.
7. Click
to set the association.
8. If the device is battery powered, wake it up manually or wait for next automatic wake up.
15
Z-WAVE DEVICES PARAMETERS
NICE devices allows to customize their operation to user's needs using configurable parameters.
The settings can be adjusted via Z-Wave controller to which the device is added.
In the interface parameters are presented as simple options in Advanced Settings of the device.
15.1 - Setting parameters for the device
1. Open the Configuration interface.
2. Go to
> Devices .
3. Click the device you want to associate.
4. Open Associations tab.
5. Select the source EndPoint and Group of the association appropriate for your needs.
6. Select the device you want to associate with.
7. Click Save when you finish.
8. If the device is battery powered, wake it up manually or wait for next automatic wake up.
If the device changes configuration, you will be asked to refresh the screen.
15.2 - Copying parameters from other device
1. Open the Configuration interface.
2. Go to
> Devices .
3. Click the device you want to associate.
4. Open Associations tab.
5. In the
Copy configuration
6. Click COPY.
7. Save parameters.
8. If the device is battery powered, wake it up manually or wait for next automatic wake up.
If the device changes configuration, you will be asked to refresh the screen.
from field choose device you want to copy the parameters from.
16
Advertisement
Table of Contents
