29
ROOMS AND SECTIONS - SECTIONS
Rooms and sections are used to organize devices to reflect their place in your house.
29.1 - Sections
Sections represent areas in your house (e.g. floors) and rooms can be assigned to them.
29.2 - Adding sections
1. Open the Configuration interface.
2. Go to
> Rooms.
3. Click
Manage
sections.
4. Type in a new name and click plus icon.
29.3 - Deleting sections
1. Open the Configuration interface.
2. Go to
> Rooms.
3. Click
Manage
sections.
4. Click
next to the device you want to remove from the system.
30
ROOMS AND SECTIONS - ROOMS
Rooms represent rooms and other places in your house (e.g. living room, corridor) and devices can be assigned to them.
30.1 - Adding rooms
1. Open the Configuration interface.
2. Go to
> Rooms.
3. Click
Add
room.
4. Set room information:
• Category – categories are used for filtering rooms by type,
• Name – name of the room,
• Section – section of the house the new room will be assigned to,
• Icon – icon that will represent the room.
5. Save.
30.2 - Editing rooms
1. Open the Configuration interface.
2. Go to
> Rooms.
3. Click
in the top right corner of the room icon.
• • •
4. Set room information:
• Category – categories are used for filtering rooms by type,
• Name – name of the room,
• Section – section of the house the new room will be assigned to,
• Icon – icon that will represent the room.
5. Save.
30.3 - Deleting rooms
1. Open the Configuration interface.
2. Go to
> Rooms.
3. Click
in the top right corner of the room icon.
• • •
4. Click Delete.
5. Confirm.
30.4 - Default room
New devices will be automatically assigned to the default room.
To choose the default room:
1. Open the Configuration Interface.
2. Go to
> General.
3. Set Default room (under the section: Main Sensors).
26