Table of Contents
Advertisement
28
NOTIFICATIONS
28.1 - Setting notifications for the device
1. Choose the states of the device you want to be informed about. Available options depend on the device type.
2. Choose the interval for the notification:
• Once (will be done once when the event occurs),
• Once per minute (at the full minute),
• Once per hour (at the full hour),
• Once per day (every day at 12.00),
• Once per week (Monday at 12.00).
3. Choose the channel of communication:
• E-mail,
• Push.
4. That's all. You will now be informed every selected time interval the device will be in one of the states you chose.
28.2 - Creating Binary sensors
1. Open the Configuration interface.
2. Go to
> Devices.
3. Click on the frame next to the device you want to rename.
4. Enter new name.
28.3 - Changing Room
1. Open the Configuration interface.
2. Go to
> Devices.
3. Choose a room from the list.
28.4 - Changing Category
Categories are used to filter devices in the History window and in the Yubii Home Center mobile app.
1. Open the Configuration interface.
2. Go to
> Devices.
3. Click > next to the device.
4. Choose a room from the list.
• Lights,
• Blinds,
• Ambience,
• Climate,
• Gates,
• Safety,
• Security,
• Multimedia,
• Remotes,
• Other.
28.5 - Adding an icon
1. Open the Configuration interface.
2. Go to
> Devices.
3. Click on the frame next to the device you want to rename.
4. Click
ADD ICON
(Size of the icon must be 128px/128px).
28.6 - Theoretical power consumption
For switches without a built-in power metering feature, you can define the theoretical power consumption.
Whenever the device is turned on, the meter will assume that it consumes power set by the user (in Watts).
1. Open the Configuration interface.
2. Go to
> Devices.
3. Expand the device you want set the theoretical power for.
4. Open the Advanced tab.
5. Enabled the
Theoretical power consumption
6. Save.
and set the power.
25
Advertisement
Table of Contents
