Table of Contents
Advertisement
7
STATUS INDICATOR
Table A7 - Gateway indicators
Power
Copper – powered
Copper – connected to Internet
Internet
Red – disconnected from Internet
Copper – connected to LAN
LAN
Fast pulsing copper – connecting to LAN
Copper – connected to Wi-Fi
Fast pulsing copper – connecting to Wi-Fi
Wi-Fi
Red – incorrect Wi-Fi password / other error
Green – Wi-Fi in Access Point mode
Copper – installer assigned
Installer
Green – remote support enabled
Red – installer not assigned
Red – in Recovery Mode
Recovery
Fast pulsing green – creating backup
Slow pulsing copper – update available
Slow pulsing copper – adding mode
Fast pulsing copper – removing mode
Smart Home
3 green blinks – adding successful
3 red blinks – adding not successful
Red – alarm armed
Security
Green – alarm disarmed
8
BUTTONS
Table A8 - Gateway buttons
Click – Wake up
Power
Hold for 5s – Sleep mode
Hold for 15s – Restart
Hold during startup – Put in Recovery mode
Hold for 10s, click when
Recovery
Hold for 20s, click when and are blinking red – Reset network settings:
and
and
blink yellow: IP set to Dynamic
and
blink green: IP set to Static
and
blink red – settings reset
are blinking green – Switch between Dynamic and Static IP:
12
Advertisement
Table of Contents
