Table of Contents
Advertisement
19
HUMIDIFIERS / DEHUMIDIFIERS
There are many devices on the market which helps in humidifying or dehumidifying.
However, these devices may not be smart, nor equipped with Z-Wave radio.
Using Linked Devices enables us to create the Humidity Device which can still regulate the humidity at your home.
19.1 - How does the linked device work?
When you choose the main device for the Humidifier, it means that the actions of the switches selected in this Linked Device will depend on
the readings from the main device:
If the humidity (%) drops below your desired humidity range, the devices selected as humidifiers will turn on.
If the humidity (%) rises above your desired humidity range, the devices selected as dehumidifiers will turn on.
If you have set both humidifier and dehumidifier, the Humidity Device will monitor and control the humidity within the given range. If you set
only one device, only humidifier or dehumidifier, you won't be able to set the full range, just the minimum or maximum threshold.
19.2 - Creating Humidity
1. Open the Configuration interface.
2. Go to
> Devices.
3. Click on
4. Select Nice Device.
5. Select Humidifier.
6. Enter the name of the humidifier.
7. Choose a Room.
8. Choose the Humidity Sensor.
9. Set desired humidity range.
10. Select humidifiers and dehumidifiers.
11. Save.
20
VIDEO GATES
Video gate is a combination of three devices which together can act as a video gate.
We set:
• device which provide us the preview (camera),
• sensor which invokes the bell (input for bell push),
• actor which can activate the door lock or gate (output to open the gate).
20.1 - Creating Video Gates
1. Open the Configuration interface.
2. Go to
> Devices.
3. Click on
4. Select Nice Device.
5. Select Thermostat.
6. Enter the name of the thermostat.
7. Choose a Room.
8. Choose the main device.
9. Select heating and/or cooling devices.
10. Save.
19
Advertisement
Table of Contents
