Table of Contents
Advertisement
53
SPRINKLERS - GARDEN CARE
53.1 - Home Center VoIP server
Watering schedules allow for automatic control of your sprinklers.
You need to create sprinklers first in order to configure watering schedules.
53.2 - Adding clients
1. Open the Configuration Interface.
2. Go to
> Access > Users.
3.
Click on
4. Choose Other Device.
5. Choose Sprinklers.
6. Fill in new sprinkler settings:the end of the list.
• Enter the name.
• Choose a room.
• Choose watering devices.
• Choose watering default time.
• Select soil moisture sensor (optional).
• Set humidity level to turn off watering.
7. Save.
53.3 - Editing sprinklers
1. Open the Configuration Interface.
2. Go to
> Access > Users.
3.
Find your sprinkler on the list.
4. Click > next to the sprinkler you want to edit.
5. Click
EDIT
DEVICE.
6. Edit settings and Save.
54
WATERING SCHEDULES - GARDEN CARE
54.1 - Adding watering schedule
1. Open the Configuration Interface.
2. Go to
> General
3.
Click
Add
Schedule.
4. Insert name for watering schedule.
5. Click > to expand the schedule.
6. Choose days to apply the schedule for.
7. Click Save.
54.2 - Adding watering sequences to a schedule
1. Click > to expand the schedule.
2. Click
to add new sequence to the schedule.
ADD SEQUENCE
3.
Choose devices to use in this sequence.
4. Click > next to the sequence to configure it.
5. Set order of the sprinklers and modify duration if needed.
6. Repeat steps 2-5 to add and configure more sequences.
7. Click Save.
39
Advertisement
Table of Contents
