Advertisement
Basic Troubleshooting
6. No light
Check "light" button.
Check G.F.C.I. (or equivalent) "test" and "reset" buttons.
7. Water is cloudy
Increase circulation cycle.
Test water chemistry.
Clean/replace filter cartridge.
8. GFCI or equivalent is tripping
A ground fault circuit interrupter (GFCI) is required by the National Electric Code for your protection.
The tripping of the GFCI may be caused by a component on the spa or by an electrical problem.
Electrical problems include although are not limited to, a faulty GFCI breaker, spa component, power
fluctuations, or improper wiring. If this new electrical service and GFCI installation, an instantly
tripping GFCI may likely be caused by improper wiring of the neutral from the GFCI to the spa. Contact
a qualified technician to rectify the problem.
If above checks do not solve the problem, contact a qualified service technician.
69
Advertisement
