Download Print this page

PDC spas Luxury Series Owner's Manual page 32

Hide thumbs Also See for Luxury Series:

Advertisement

Installation and Initial Start-Up Instructions
29
and hold latch against the cabinet side panel. To position the lock correctly, have a second person hold the strap tight on the
opposite side of the hot tub cover. The cover must be tight. Do not place the latch over the grooves of the cabinet finish.
Remove the latch from the lock, attach the lock to the cabinet side panel with three #4 screws provided. Attach the other
locks to the cabinet in the same manner. To lock the cover in place, insert the key and turn it clockwise 1/4 turn. To unlock
the latches, insert the key and turn it counterclockwise 1/4 turn. Always keep locked when not in use. Keep the keys in a safe
place, out of the reach of children.
Should you be installing a cover lifting device, refer to the manufacturer's instructions for proper installation. Those devices
that are to be screwed into the cabinet must have consideration of the hot tub framework for proper support and function.
Those devices should never be screwed into only the cabinet sidewall as there is not adequate support from the panel alone.
The framework of the hot tub must be accessed.
Always use an approved insulating locking hot tub cover when not in use to assure safety, protection of the hot tub surface
and efficiency. When not in use, tub must be covered to avoild prolonged exposure to weather conditions and sun. Constant,
prolonged exposure and use of an unapproved cover can result in damage to the acrylic surface and void the warranty.

Advertisement

loading