Advertisement
Operating System, LifeStyle Series | Accent™ Control
Miscellaneous Messages
Communications error
The control panel is not receiving communication from the System. Call for Service.
System-Related
Memory Failure—Checksum Error* – M022
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the firmware (operation program)
and requires a service call.
Memory Warning—Persistent Memory Reset (Persistent Memory Error)* – M021
Contact your dealer or service organization if this message appears on more than one power-up.
Memory Failure—Clock Error* – M020
Contact your dealer or service organization.
Configuration Error (Spa will not Start Up)
Contact your dealer or service organization.
The GFCI Failure (System Could Not Test the GFCI) – M036
(North America Only) May indicate an unsafe installation. Contact your dealer or service organization.
A Pump Appears to be Stuck ON – M034
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
Hot Fault – M035
A Pump appears to have been Stuck ON when spa was last powered. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact
your dealer or service organization.
60
Advertisement
