Advertisement
Operation Systems, Luxury Series | SmartTouch™ Control
ICON Specifications
1.
= High Temperature Range.
2.
= Ready Mode.
3.
= Filter Cycle 1 is running.
4.
= Ozone is Running. If you don't see the icon that means the Ozone is OFF.
5.
= Cleanup Cycle is Running.
6.
= Wi-Fi icon just indicates that the Wi-Fi link is connected. It does not indicate signal strength.
Note: Not all systems that support Wi-Fi display this icon.
7. Lock Icon:
When displayed, indicates the panel is in a locked mode. To unlock or lock a setting or panel lock, first press the corresponding
icon on the Lock Screen, then press and hold the word "Lock" for 5+ seconds until the text and icon change to the opposite state.
There are 2 lock icons that can be shown on the title bar of most screens. A tall skinny one
It is shown on screens that are affected by the settings lock. And the standard lock icon Padlock
locked. If both settings and panel are locked, only the panel lock will show since the settings lock doesn't do much in that situation. When
the panel is locked, the Settings Screen will only show items not affected by that lock (System Info and Lock Screens).
8.
= Invert (or flip) Screen.
9.
= Lights is ON.
10.
= Music is Active.
11. Message Waiting Indicator: The Message Waiting Indicator will show one of the following icons:
Touch the Indicator to go to a Message Screen which shows the message.
Some messages will include the "Call for Service" text as it requires a service technician to fix the problem. If the panel is locked and a message
alert appears, you will be taken to the Lock Screen (where you will need to Unlock the panel) before you can clear the message.
Touching the Error/Warning/Reminder/Info Icon on the Message Screen will take you to the System Information Screen to allow for trouble-
shooting over the phone or for a field service tech to better understand what is going on. Exiting the System information Screen will take you back
to the Message Screen in that situation.
12.
Adjust set temperature higher.
13.
= Spa Equipment Control Icon. Brings up a screen where the spa jets, blower or other equipment can be controlled. While on the Spa
Equipment Screen, you can press a Jets button once for low speed, and if configured press it again for high speed.
if a pump is running or not.
14. Indicates if the temperature is in
15. Current water temperature if
16. Setting Icon.
= Settings is Active.
17. Different animation sequences, including blinking, may indicate different stages of heating.
18.
Adjust set temperature lower.
= Low Temperature Range.
= Ready And Rest Mode.
= Filter Cycle 2 is running.
= Light is Inactive.
= Music is Inactive.
= Fahrenheit or
or
is solid; set temperature if
= Settings is Inactive (when the panel is locked). Takes you to Settings Screen
= Rest Mode.
= Filter Cycles 1 and 2 are both running.
representing a settings lock is applied.
= Light is Disabled.
= Music is Disabled.
= Celsius.
or
is flashing.
which represents the Panel being
= Jet is Inactive. Indicates
36
Advertisement
