Advertisement
Operation Systems, Premium Series | ProView™ Control
47
Main Functions
Spa Status
Important information about spa operation can be seen quickly from
the Main Screen.
The most important features, including Set Temperature adjustment,
can be accessed from this screen.
The actual water temperature can be seen in large text and the desired,
or Set Temperature, can be selected and adjusted. Time-of-day, Ozone
operation and Filter Operation status is available, along with other
messages and alerts. High Temperature Range vs. Low Temperature
Range is indicated in the upper right corner.
A Lock icon is visible if the panel or settings are locked.
Navigation
Navigating the entire menu structure is done with the 5 buttons on the control panel.
The right navigation arrow on the screen indicates a menu. Press the
right navigation button to enter the menu. A selection box will then
appear in the center of the screen. Press the left or right navigation
button to view different choices. Press the center Select button once
on the desired choice.
Messages: At the bottom of the screen, messages may appear at various
times. Some messages must be dismissed by the user.
All Equipment Access: The Spa Screen shows all available equipment to control. The display shows icons that are related to the
equipment installed on a particular spa model, so this screen may change depending on the installation.
The navigation buttons are used to select an individual device. The device that is chosen will have a box around it and will be shown
at the top of the screen. Once a device is selected, it can be controlled using the center Select Button.
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the state that the equipment is in.
Programming, Etc.
The Settings Screen is where all programming and other spa behaviors are controlled.
This screen has several features that can be acted on directly. These features include Temp Range, Heat Mode, and Invert Panel.
When one of these items is highlighted, the Select Button is used to toggle between two settings.
All other menu items (with an arrow pointing to the right) go to another level in the menu.
Advertisement
