Advertisement
Operation Systems, Luxury Series | SmartTouch™ Control
Luxury Spa Series—Spa Screen
The Spa Screen shows all available equipment* to control. The display shows icons that are related to the equipment installed on a
particular spa model, so this screen may change depending on the installation.
The icon buttons are used to select and control individual devices.
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect
the state of the equipment. Below are some examples of 2-speed Pump indicators.
Values Increment / Decrement and Invert
If an Up or Down button is shown and pressed when on an editing page, and a value has been selected (highlighted), the value can
be incremented by pressing the up arrow or decremented by pressing the down arrow.
Common Buttons
Exiting Screens
The Back button is on every screen except the Main Screen, the Priming Mode Screen are a Message Display
Screen.
When you see only this button, or this button plus an Inactive Save Button, it means Back or Exit. It appears
on editing screens before you have changed any value, as well as on all other screens. When you see both the
Back button and an Active Save button, the Save button will Save, while the Back button will Cancel. If the
screen times out due to no activity it will act like Cancel.
Page Right / Left
If there is a right arrow at the bottom of the screen, it takes you to the next page.
If there
the
screen,
previ-
Jets Off
Jets Low
Jets High
is a left arrow at
bottom of the
it takes you to the
ous page.
40
Advertisement
