Connecting The Ipg Laser Optics And Additional Extraction; Connecting The Ipg Laser Optics - Fronius LaserHybrid WF 25i Operating Instructions Manual

Connecting the IPG laser optics and additional
extraction
Connecting the
IPG laser optics
Risk of damage to the laser welding head due to contamination from above.
▶
▶
CAUTION!
Observe the Operating Instructions, specifications, and safety instructions
from the manufacturer of the laser optics
Before connecting, position the laser welding head so that the longitudinal
axis of the laser welding head is outside of the horizontal (> 90°). This will en-
sure that no dirt can get into the laser optics from above.
5x
1
1
1
1
a
Remove the 5 Allen screws, size 6
1
mm
For installation:
The 3 shorter screws are one below the
other; the 2 longer screws are oppos-
ite.
1
1
Remove the 2 register pins:
2
a) Fit and screw on extractor tool
for register pins
b) Knock the striking weight of
the extractor tool back in order
to remove the register pins
c) Remove robot connection
bracket
c
55